3 open source boards using the SIP32509DT-T1-GE3
Real designs built with the SIP32509DT-T1-GE3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRFUECG rev4
ultimaterobotics
63 × 22 mm68 parts2LMIT77
Nordic nRFSkulljack
40 × 34.6 mm66 parts2LMIT1
Mirte usb switcher
mirte-robot
21.5 × 33 mm14 parts2LCERN-OHL-P-2.01
The SIP32509DT-T1-GE3 in open source designs
The gallery holds 3 open source boards using the SIP32509DT-T1-GE3 from 3 GitHub repositories; a typical one measures about 40 × 33 mm and carries around 66 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is UECG rev4 by ultimaterobotics.
Parts used alongside the SIP32509DT-T1-GE3
Microcontrollers on boards using the SIP32509DT-T1-GE3
What boards using the SIP32509DT-T1-GE3 are built for
SIP32509DT-T1-GE3: common questions
Where can I find a SIP32509DT-T1-GE3 reference design?
Each of the 3 boards on this page is a real design using the SIP32509DT-T1-GE3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SIP32509DT-T1-GE3 use?
Most are built on Nordic nRF (2).
How big is a typical board using the SIP32509DT-T1-GE3?
The median is 40 × 33 mm, and 100% are two-layer designs.
What is the most popular open source board using the SIP32509DT-T1-GE3?
By GitHub stars, UECG rev4 by ultimaterobotics, with 77 stars.
Can I simulate one of these boards using the SIP32509DT-T1-GE3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.