5 open source boards using the SK6805-EC20
Real designs built with the SK6805-EC20, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Cellsim-8ch
atopile
13 × 9 mm608 parts4LMIT29
ESP32Veramonitor
eigenlucy
137.2 × 120.1 mm47 parts2LMIT5
Ledrow x10
45.1 × 1.9 mm20 parts2LMIT5
Cell
95.1 × 8.4 mm64 parts4LMIT29
Kailh sw
10 × 10 mm4 parts2LMIT5
The SK6805-EC20 in open source designs
The gallery holds 5 open source boards using the SK6805-EC20 from 2 GitHub repositories; a typical one measures about 45.1 × 9 mm and carries around 47 components.
60% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Cellsim-8ch by atopile.
Microcontrollers on boards using the SK6805-EC20
What boards using the SK6805-EC20 are built for
SK6805-EC20: common questions
Where can I find a SK6805-EC20 reference design?
Each of the 5 boards on this page is a real design using the SK6805-EC20. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SK6805-EC20 use?
Most are built on ESP32 (1).
How big is a typical board using the SK6805-EC20?
The median is 45.1 × 9 mm, and 60% are two-layer designs.
What is the most popular open source board using the SK6805-EC20?
By GitHub stars, Cellsim-8ch by atopile, with 29 stars.
Can I simulate one of these boards using the SK6805-EC20 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.