6 open source boards using the SLG5NT1487VTR
Real designs built with the SLG5NT1487VTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Stickhub
circuitly
16.5 × 40 mm88 parts2LCC-BY-NC-4.00Stickhub-7
circuitly
16.5 × 40 mm88 parts2LCC-BY-NC-4.00Stickhub commits
circuitly
16.5 × 40 mm88 parts2LCC-BY-NC-4.00StickHub
circuitly
16.5 × 40 mm88 parts2LNo license0Stickhub
claynicholson
16.5 × 40 mm89 parts2LMIT102StickHub
nickradfc
16.5 × 40 mm89 parts2LNo license0
How designs wire the SLG5NT1487VTR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SLG5NT1487VTR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF.
- The CAP pin has a capacitor to GND on 6 of 6 designs, most often 15 nF.
- The ON pin is tied to VIN on 6 of 6 designs.
- The D pin is tied to VIN on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: VIN 100% |
|
| ONpin 2 | Connected to: VIN 100% | — |
| Dpin 3 | Connected to: VIN 100% | — |
| Spin 5 | Connected to: 5V 100% | — |
| CAPpin 7 | Connected to: Signal 100% |
|
| GNDpin 8 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stickhub by claynicholson, StickHub by circuitly, Stickhub by circuitly and Stickhub-7 by circuitly.
The SLG5NT1487VTR in open source designs
The gallery holds 6 open source boards using the SLG5NT1487VTR from 6 GitHub repositories; a typical one measures about 16.5 × 40 mm and carries around 88 components.
100% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Stickhub by claynicholson.
Parts used alongside the SLG5NT1487VTR
SLG5NT1487VTR: common questions
Where can I find a SLG5NT1487VTR reference design?
Each of the 6 boards on this page is a real design using the SLG5NT1487VTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SLG5NT1487VTR VDD pin?
The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the SLG5NT1487VTR.
How is the SLG5NT1487VTR CAP pin connected?
The CAP pin has a capacitor to GND on 6 of 6 designs, most often 15 nF. Counted from the KiCad layouts of 6 open source designs using the SLG5NT1487VTR.
How is the SLG5NT1487VTR ON pin connected?
The ON pin is tied to VIN on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SLG5NT1487VTR.
How big is a typical board using the SLG5NT1487VTR?
The median is 16.5 × 40 mm, and 100% are two-layer designs.
What is the most popular open source board using the SLG5NT1487VTR?
By GitHub stars, Stickhub by claynicholson, with 102 stars.
Can I simulate one of these boards using the SLG5NT1487VTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.