7 open source boards using the XR22417CV48TR-F
Real designs built with the XR22417CV48TR-F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Stickhub-7
circuitly
16.5 × 40 mm88 parts2LCC-BY-NC-4.00Stickhub
circuitly
16.5 × 40 mm88 parts2LCC-BY-NC-4.00StickHub.kicad
beniroquai
16.5 × 40 mm88 parts2LNo license0Stickhub commits
circuitly
16.5 × 40 mm88 parts2LCC-BY-NC-4.00StickHub
circuitly
16.5 × 40 mm88 parts2LNo license0Stickhub
claynicholson
16.5 × 40 mm89 parts2LMIT102StickHub
nickradfc
16.5 × 40 mm89 parts2LNo license0
How designs wire the XR22417CV48TR-F
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the XR22417CV48TR-F connects to, and the resistors, capacitors and other passives placed on it.
- The LED1/SCL pin has a series resistor on 7 of 7 designs, most often 470 Ω.
- The LED2 pin has a series resistor on 7 of 7 designs, most often 470 Ω.
- The LED3 pin has a series resistor on 7 of 7 designs, most often 470 Ω.
- The VCC18 pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| TEST#/SDApin 2 | Connected to: Not connected 100% | — |
| LED1/SCLpin 3 | Connected to: Signal 100% |
|
| LED2pin 4 | Connected to: Signal 100% |
|
| LED3pin 5 | Connected to: Signal 100% |
|
| VCC18pin 6, 21, 28 | Connected to: 1.8V 100% |
|
| LED4pin 7 | Connected to: Signal 100% |
|
| VCC5pin 8 | Connected to: 5V 100% |
|
| 3V3_OUTpin 9 | Connected to: 3.3V 100% | — |
| GNDpin 10, 24, 39 | Connected to: GND 100% | — |
| VCC33pin 15, 20, 26, 31, 36, 42 | Connected to: 3.3V 100% |
|
| XTALINpin 22 | Connected to: Signal 100% |
|
| XTALOUTpin 23 | Connected to: Signal 100% |
|
| 1V8_OUTpin 25 | Connected to: 1.8V 100% | — |
| REXTpin 27 | Connected to: Signal 100% |
|
| EXT_RST#pin 40 | Connected to: Signal 100% |
|
| VBUS_SENSEpin 41 | Connected to: Signal 100% |
|
| TEST1#pin 43 | Connected to: Signal 100% |
|
| TEST#2/DNCpin 44 | Connected to: Not connected 100% | — |
| TEST3#pin 45 | Connected to: Signal 100% |
|
| LED7pin 46 | Connected to: Signal 100% |
|
| LED6pin 47 | Connected to: Signal 100% |
|
| LED5pin 48 | Connected to: Signal 100% |
|
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stickhub by claynicholson, StickHub.kicad pcb by beniroquai, StickHub by circuitly and Stickhub by circuitly.
The XR22417CV48TR-F in open source designs
The gallery holds 7 open source boards using the XR22417CV48TR-F from 7 GitHub repositories; a typical one measures about 16.5 × 40 mm and carries around 88 components.
100% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is Stickhub by claynicholson.
Parts used alongside the XR22417CV48TR-F
XR22417CV48TR-F: common questions
Where can I find a XR22417CV48TR-F reference design?
Each of the 7 boards on this page is a real design using the XR22417CV48TR-F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the XR22417CV48TR-F LED1/SCL pin?
The LED1/SCL pin has a series resistor on 7 of 7 designs, most often 470 Ω. Counted from the KiCad layouts of 7 open source designs using the XR22417CV48TR-F.
What resistor goes on the XR22417CV48TR-F LED2 pin?
The LED2 pin has a series resistor on 7 of 7 designs, most often 470 Ω. Counted from the KiCad layouts of 7 open source designs using the XR22417CV48TR-F.
What resistor goes on the XR22417CV48TR-F LED3 pin?
The LED3 pin has a series resistor on 7 of 7 designs, most often 470 Ω. Counted from the KiCad layouts of 7 open source designs using the XR22417CV48TR-F.
How big is a typical board using the XR22417CV48TR-F?
The median is 16.5 × 40 mm, and 100% are two-layer designs.
What is the most popular open source board using the XR22417CV48TR-F?
By GitHub stars, Stickhub by claynicholson, with 102 stars.
Can I simulate one of these boards using the XR22417CV48TR-F before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.