2 open source boards using the SN74HC595BRWNR

Real designs built with the SN74HC595BRWNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The SN74HC595BRWNR in open source designs

The gallery holds 2 open source boards using the SN74HC595BRWNR from 2 GitHub repositories; a typical one measures about 65 × 100 mm and carries around 175 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is UBMS-2 by grokicad.

Microcontrollers on boards using the SN74HC595BRWNR

ESP32 1

What boards using the SN74HC595BRWNR are built for

SN74HC595BRWNR: common questions

Where can I find a SN74HC595BRWNR reference design?

Each of the 2 boards on this page is a real design using the SN74HC595BRWNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SN74HC595BRWNR use?

Most are built on ESP32 (1).

How big is a typical board using the SN74HC595BRWNR?

The median is 65 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the SN74HC595BRWNR?

By GitHub stars, UBMS-2 by grokicad, with 26 stars.

Can I simulate one of these boards using the SN74HC595BRWNR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.