4 open source boards using the SN74LVC1G139DCUR

Real designs built with the SN74LVC1G139DCUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The SN74LVC1G139DCUR in open source designs

The gallery holds 4 open source boards using the SN74LVC1G139DCUR from 3 GitHub repositories; a typical one measures about 142.5 × 82.5 mm and carries around 191 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is EEZ DIB MCU r1B2 by eez-open.

Parts used alongside the SN74LVC1G139DCUR

Microcontrollers on boards using the SN74LVC1G139DCUR

What boards using the SN74LVC1G139DCUR are built for

SN74LVC1G139DCUR: common questions

Where can I find a SN74LVC1G139DCUR reference design?

Each of the 4 boards on this page is a real design using the SN74LVC1G139DCUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SN74LVC1G139DCUR use?

Most are built on STM32 (3).

How big is a typical board using the SN74LVC1G139DCUR?

The median is 142.5 × 82.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the SN74LVC1G139DCUR?

By GitHub stars, EEZ DIB MCU r1B2 by eez-open, with 394 stars.

Can I simulate one of these boards using the SN74LVC1G139DCUR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part