5 open source boards using the SN74LVC1G14DRL
Real designs built with the SN74LVC1G14DRL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0991RP2040/RP2350
Harp.device.cuttlefish
AllenNeuralDynamics
120 × 75 mm185 parts4LNo license0STM32
Ghoul
tzarc
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0991TI MSP430/CC
Big Red Payload Controller
Big-Red-Sat
87 × 75 mm148 parts4LCC-BY-SA-4.06STM32
Kobold
tzarc
76 × 75.1 mm94 parts4LCERN-OHL-S-2.0991
The SN74LVC1G14DRL in open source designs
The gallery holds 5 open source boards using the SN74LVC1G14DRL from 3 GitHub repositories; a typical one measures about 120 × 75.1 mm and carries around 163 components.
60% use four copper layers or more, and 80% carry an open source license.
The most starred is Djinn by tzarc.
Microcontrollers on boards using the SN74LVC1G14DRL
What boards using the SN74LVC1G14DRL are built for
SN74LVC1G14DRL: common questions
Where can I find a SN74LVC1G14DRL reference design?
Each of the 5 boards on this page is a real design using the SN74LVC1G14DRL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC1G14DRL use?
Most are built on STM32 (3), RP2040/RP2350 (1) and TI MSP430/CC (1).
How big is a typical board using the SN74LVC1G14DRL?
The median is 120 × 75.1 mm, and 40% are two-layer designs.
What is the most popular open source board using the SN74LVC1G14DRL?
By GitHub stars, Djinn by tzarc, with 991 stars.
Can I simulate one of these boards using the SN74LVC1G14DRL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.