16 open source boards using the SN74LVC2G125DCTR

Real designs built with the SN74LVC2G125DCTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

The SN74LVC2G125DCTR in open source designs

The gallery holds 16 open source boards using the SN74LVC2G125DCTR from 2 GitHub repositories; a typical one measures about 86 × 145 mm and carries around 197 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Fixture import NOT FOR FABRICATION by JCastel358.

Microcontrollers on boards using the SN74LVC2G125DCTR

What boards using the SN74LVC2G125DCTR are built for

SN74LVC2G125DCTR: common questions

Where can I find a SN74LVC2G125DCTR reference design?

Each of the 16 boards on this page is a real design using the SN74LVC2G125DCTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SN74LVC2G125DCTR use?

Most are built on ESP32 (5).

How big is a typical board using the SN74LVC2G125DCTR?

The median is 86 × 145 mm, and 0% are two-layer designs.

What is the most popular open source board using the SN74LVC2G125DCTR?

By GitHub stars, Fixture import NOT FOR FABRICATION by JCastel358, with 1 stars.

Can I simulate one of these boards using the SN74LVC2G125DCTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part