2 open source boards using the SN74LVC3G17DCTR
Real designs built with the SN74LVC3G17DCTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Bldc esc
EwoudVV
544 × 768 mm421 parts4LNo license1
NXPMotortester v2.0
RoboJackets
105.9 × 88.1 mm76 parts4LApache-2.032
The SN74LVC3G17DCTR in open source designs
The gallery holds 2 open source boards using the SN74LVC3G17DCTR from 2 GitHub repositories; a typical one measures about 325 × 428.1 mm and carries around 249 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Motortester v2.0 by RoboJackets.
What boards using the SN74LVC3G17DCTR are built for
SN74LVC3G17DCTR: common questions
Where can I find a SN74LVC3G17DCTR reference design?
Each of the 2 boards on this page is a real design using the SN74LVC3G17DCTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC3G17DCTR use?
Most are built on NXP (1) and STM32 (1).
How big is a typical board using the SN74LVC3G17DCTR?
The median is 325 × 428.1 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC3G17DCTR?
By GitHub stars, Motortester v2.0 by RoboJackets, with 32 stars.
Can I simulate one of these boards using the SN74LVC3G17DCTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.