2 open source boards using the SP3003-02XJ

Real designs built with the SP3003-02XJ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The SP3003-02XJ in open source designs

The gallery holds 2 open source boards using the SP3003-02XJ from 2 GitHub repositories; a typical one measures about 135.9 × 83.8 mm and carries around 269 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is EverestCM4 by PionixPublic.

Microcontrollers on boards using the SP3003-02XJ

What boards using the SP3003-02XJ are built for

SP3003-02XJ: common questions

Where can I find a SP3003-02XJ reference design?

Each of the 2 boards on this page is a real design using the SP3003-02XJ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SP3003-02XJ use?

Most are built on Raspberry Pi (1) and STM32 (1).

How big is a typical board using the SP3003-02XJ?

The median is 135.9 × 83.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the SP3003-02XJ?

By GitHub stars, EverestCM4 by PionixPublic, with 68 stars.

Can I simulate one of these boards using the SP3003-02XJ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part