3 open source boards using the SPX3819M5-L-5-0

Real designs built with the SPX3819M5-L-5-0, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The SPX3819M5-L-5-0 in open source designs

The gallery holds 3 open source boards using the SPX3819M5-L-5-0 from 3 GitHub repositories; a typical one measures about 84.3 × 64 mm and carries around 96 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Tapeshnik proto by svofski.

Microcontrollers on boards using the SPX3819M5-L-5-0

What boards using the SPX3819M5-L-5-0 are built for

Robotics & motion 1

SPX3819M5-L-5-0: common questions

Where can I find a SPX3819M5-L-5-0 reference design?

Each of the 3 boards on this page is a real design using the SPX3819M5-L-5-0. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SPX3819M5-L-5-0 use?

Most are built on RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the SPX3819M5-L-5-0?

The median is 84.3 × 64 mm, and 100% are two-layer designs.

What is the most popular open source board using the SPX3819M5-L-5-0?

By GitHub stars, Tapeshnik proto by svofski, with 14 stars.

Can I simulate one of these boards using the SPX3819M5-L-5-0 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.