2 open source boards using the STM32F042G6U6
Real designs built with the STM32F042G6U6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Rx5808-receiver
msaribekyan
50 × 25 mm38 parts2LGPL-3.03STM32
Pdmv2
jumper385
94 × 90.2 mm102 parts4LNo license0
The STM32F042G6U6 in open source designs
The gallery holds 2 open source boards using the STM32F042G6U6 from 2 GitHub repositories; a typical one measures about 72 × 57.6 mm and carries around 70 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Rx5808-receiver by msaribekyan.
Microcontrollers on boards using the STM32F042G6U6
STM32F042G6U6: common questions
Where can I find a STM32F042G6U6 reference design?
Each of the 2 boards on this page is a real design using the STM32F042G6U6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F042G6U6 use?
Most are built on STM32 (2).
How big is a typical board using the STM32F042G6U6?
The median is 72 × 57.6 mm, and 50% are two-layer designs.
What is the most popular open source board using the STM32F042G6U6?
By GitHub stars, Rx5808-receiver by msaribekyan, with 3 stars.
Can I simulate one of these boards using the STM32F042G6U6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.