3 open source boards using the STM32F102C6

Real designs built with the STM32F102C6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The STM32F102C6 in open source designs

The gallery holds 3 open source boards using the STM32F102C6 from 2 GitHub repositories; a typical one measures about 150 × 50 mm and carries around 62 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is IBM-ModelM-101 by idpromnut.

Microcontrollers on boards using the STM32F102C6

STM32 3

What boards using the STM32F102C6 are built for

STM32F102C6: common questions

Where can I find a STM32F102C6 reference design?

Each of the 3 boards on this page is a real design using the STM32F102C6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the STM32F102C6 use?

Most are built on STM32 (3).

How big is a typical board using the STM32F102C6?

The median is 150 × 50 mm, and 100% are two-layer designs.

What is the most popular open source board using the STM32F102C6?

By GitHub stars, IBM-ModelM-101 by idpromnut, with 15 stars.

Can I simulate one of these boards using the STM32F102C6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.