7 open source boards using the STM32F303CCTx

Real designs built with the STM32F303CCTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the STM32F303CCTx

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the STM32F303CCTx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDA pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF).
  • The PF0 pin has a crystal on 6 of 7 designs, most often 8 MHz.
  • The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The VBAT pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF).
VBATpin 1Connected to: 3.3V 86%
  • Decoupling capacitor on 71% · 100 nF (9), 1 µF (4), 4.7 µF (1)
PC14pin 3Connected to: Signal 57% · not connected 43%
  • Series resistor on 57% · 4.7 kΩ (1), 100 Ω (1), 270 Ω (1)
PC15pin 4Connected to: Signal 57% · not connected 43%
  • Series resistor on 43% · 4.7 kΩ (1), 270 Ω (1), 1 kΩ (1)
PF0pin 5Connected to: Signal 86%
  • Crystal on 86% · 8 MHz (4)
  • Capacitor to GND on 71% · 22 pF (2), 12 pF (2), 14 pF (1)
PF1pin 6Connected to: Signal 86%
  • Crystal on 71% · 8 MHz (3)
  • Capacitor to GND on 57% · 12 pF (2), 22 pF (1), 14 pF (1)
NRSTpin 7Connected to: A connector 57% · not connected 43%
  • Capacitor to GND on 57% · 100 nF (4)
VSSApin 8Connected to: GND 86%
VDDApin 9Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 100% · 100 nF (10), 1 µF (4), 10 nF (3)
PB0pin 18Connected to: A connector 33%
  • Resistor to GND on 33% · 30 kΩ (1), 10 kΩ (1)
PB1pin 19Connected to: A connector 33%
  • Resistor to GND on 33% · 1 kΩ (1), 10 kΩ (1)
VSSpin 23, 35, 47Connected to: GND 100%
VDDpin 24, 36, 48Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (25), 1 µF (3), 220 pF (1)
PB12pin 25Connected to: Not connected 67% · a signal 33%
PA11pin 32Connected to: A connector 50%
  • Series resistor on 33% · 22 Ω (2)
PA12pin 33Connected to: A connector 50%
  • Pull-up to 3V on 33% · 1.5 kΩ (2)
  • Series resistor on 33% · 22 Ω (2)
BOOT0pin 44Connected to: Signal 67% · not connected 17% · GND 17%
  • Resistor to GND on 67% · 10 kΩ (4)

28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DingoPDM by corygrant, TinyFISH by fishpepper, Io board by ReflexCreations and Slow bldc by osrf.

The STM32F303CCTx in open source designs

The gallery holds 7 open source boards using the STM32F303CCTx from 7 GitHub repositories; a typical one measures about 72.4 × 45.5 mm and carries around 95 components.

57% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.

The most starred is DingoPDM by corygrant.

Microcontrollers on boards using the STM32F303CCTx

What boards using the STM32F303CCTx are built for

STM32F303CCTx: common questions

Where can I find a STM32F303CCTx reference design?

Each of the 7 boards on this page is a real design using the STM32F303CCTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F303CCTx VDDA pin?

The VDDA pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F303CCTx.

How is the STM32F303CCTx PF0 pin connected?

The PF0 pin has a crystal on 6 of 7 designs, most often 8 MHz. Counted from the KiCad layouts of 7 open source designs using the STM32F303CCTx.

What decoupling capacitors do designs use on the STM32F303CCTx VDD pin?

The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F303CCTx.

Which microcontrollers do boards using the STM32F303CCTx use?

Most are built on STM32 (7).

How big is a typical board using the STM32F303CCTx?

The median is 72.4 × 45.5 mm, and 57% are two-layer designs.

What is the most popular open source board using the STM32F303CCTx?

By GitHub stars, DingoPDM by corygrant, with 128 stars.

Can I simulate one of these boards using the STM32F303CCTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part