4 open source boards using the STM32H745IIT6

Real designs built with the STM32H745IIT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The STM32H745IIT6 in open source designs

The gallery holds 4 open source boards using the STM32H745IIT6 from 3 GitHub repositories; a typical one measures about 80 × 102 mm and carries around 221 components.

75% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is FlightComputer by akkdong.

Parts used alongside the STM32H745IIT6

Microcontrollers on boards using the STM32H745IIT6

STM32H745IIT6: common questions

Where can I find a STM32H745IIT6 reference design?

Each of the 4 boards on this page is a real design using the STM32H745IIT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the STM32H745IIT6 use?

Most are built on STM32 (4).

How big is a typical board using the STM32H745IIT6?

The median is 80 × 102 mm, and 75% are two-layer designs.

What is the most popular open source board using the STM32H745IIT6?

By GitHub stars, FlightComputer by akkdong, with 2 stars.

Can I simulate one of these boards using the STM32H745IIT6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part