2 open source boards using the STM32H750XBH6
Real designs built with the STM32H750XBH6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Reworkctf
azonenberg
54 × 50 mm125 parts4LBSD-3-Clause33STM32
YTAR
Zychlix
50 × 50 mm180 parts6LNo license0
The STM32H750XBH6 in open source designs
The gallery holds 2 open source boards using the STM32H750XBH6 from 2 GitHub repositories; a typical one measures about 52 × 50 mm and carries around 153 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Reworkctf by azonenberg.
Microcontrollers on boards using the STM32H750XBH6
STM32H750XBH6: common questions
Where can I find a STM32H750XBH6 reference design?
Each of the 2 boards on this page is a real design using the STM32H750XBH6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32H750XBH6 use?
Most are built on STM32 (2).
How big is a typical board using the STM32H750XBH6?
The median is 52 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32H750XBH6?
By GitHub stars, Reworkctf by azonenberg, with 33 stars.
Can I simulate one of these boards using the STM32H750XBH6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.