8 open source boards using the TC4424EPA

Real designs built with the TC4424EPA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

The TC4424EPA in open source designs

The gallery holds 8 open source boards using the TC4424EPA from 4 GitHub repositories; a typical one measures about 99.4 × 53.7 mm and carries around 73 components.

100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is NO2C by turboedge.

Parts used alongside the TC4424EPA

Microcontrollers on boards using the TC4424EPA

What boards using the TC4424EPA are built for

TC4424EPA: common questions

Where can I find a TC4424EPA reference design?

Each of the 8 boards on this page is a real design using the TC4424EPA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TC4424EPA use?

Most are built on AVR/Arduino (6).

How big is a typical board using the TC4424EPA?

The median is 99.4 × 53.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the TC4424EPA?

By GitHub stars, NO2C by turboedge, with 107 stars.

Can I simulate one of these boards using the TC4424EPA before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part