5 open source boards using the TCAN1044VDRQ1
Real designs built with the TCAN1044VDRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Esc hw rev2
V2gkr
82.6 × 55 mm103 parts6LNo license1STM32
NanoGaN
eren-akbayin
60 × 100 mm192 parts6LNo license0- schematic only · 88 partsSTM32
ReefVolt PlugControl — 2ch AC heater carrier
blueacro
88 parts4LCERN-OHL-P-2.00 - schematic only · 81 partsESP32
ReefVolt SensorBuddy
blueacro
81 parts4LCERN-OHL-P-2.00 - schematic only · 49 partsSTM32
ReefVolt DryContact — 4ch Form-C carrier
blueacro
49 parts4LCERN-OHL-P-2.00
The TCAN1044VDRQ1 in open source designs
The gallery holds 5 open source boards using the TCAN1044VDRQ1 from 3 GitHub repositories; a typical one measures about 71.3 × 77.5 mm and carries around 88 components.
100% use four copper layers or more, and 60% carry an open source license.
The most starred is Esc hw rev2 by V2gkr.
What boards using the TCAN1044VDRQ1 are built for
TCAN1044VDRQ1: common questions
Where can I find a TCAN1044VDRQ1 reference design?
Each of the 5 boards on this page is a real design using the TCAN1044VDRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TCAN1044VDRQ1 use?
Most are built on STM32 (4) and ESP32 (1).
How big is a typical board using the TCAN1044VDRQ1?
The median is 71.3 × 77.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the TCAN1044VDRQ1?
By GitHub stars, Esc hw rev2 by V2gkr, with 1 stars.
Can I simulate one of these boards using the TCAN1044VDRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.