2 open source boards using the Teensy3.5_All_Pins

Real designs built with the Teensy3.5_All_Pins, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The Teensy3.5_All_Pins in open source designs

The gallery holds 2 open source boards using the Teensy3.5_All_Pins from 2 GitHub repositories; a typical one measures about 80 × 125 mm and carries around 64 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Main Board 2023 by LesKaribous.

Parts used alongside the Teensy3.5_All_Pins

Microcontrollers on boards using the Teensy3.5_All_Pins

NXP 2

What boards using the Teensy3.5_All_Pins are built for

Robotics & motion 1

Teensy3.5_All_Pins: common questions

Where can I find a Teensy3.5_All_Pins reference design?

Each of the 2 boards on this page is a real design using the Teensy3.5_All_Pins. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the Teensy3.5_All_Pins use?

Most are built on NXP (2).

How big is a typical board using the Teensy3.5_All_Pins?

The median is 80 × 125 mm, and 100% are two-layer designs.

What is the most popular open source board using the Teensy3.5_All_Pins?

By GitHub stars, Main Board 2023 by LesKaribous, with 3 stars.

Can I simulate one of these boards using the Teensy3.5_All_Pins before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.