3 open source boards using the TEENSY40

Real designs built with the TEENSY40, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The TEENSY40 in open source designs

The gallery holds 3 open source boards using the TEENSY40 from 3 GitHub repositories; a typical one measures about 131.1 × 19.2 mm and carries around 16 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is DNMS - Digital Noise Maesurement Sensor by hbitter.

Parts used alongside the TEENSY40

Microcontrollers on boards using the TEENSY40

What boards using the TEENSY40 are built for

TEENSY40: common questions

Where can I find a TEENSY40 reference design?

Each of the 3 boards on this page is a real design using the TEENSY40. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TEENSY40 use?

Most are built on NXP (3).

How big is a typical board using the TEENSY40?

The median is 131.1 × 19.2 mm, and 100% are two-layer designs.

What is the most popular open source board using the TEENSY40?

By GitHub stars, DNMS - Digital Noise Maesurement Sensor by hbitter, with 88 stars.

Can I simulate one of these boards using the TEENSY40 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part