16 open source boards using the TEENSY41
Real designs built with the TEENSY41, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Pewpew laserboard
matthewSorensen
80 × 95 mm119 parts2LCERN-OHL-S-2.010NXP
Injection controller
refault-artifacts
61 × 40 mm14 parts2LMIT2NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm298 parts4LNo license0NXP
Control rev3
PaulStoffregen
48.3 × 105.4 mm127 parts2LNo license160NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0- schematic only · 120 partsNXP
Tms
devkyber
120 parts2LNo license0 NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm180 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm180 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm180 parts2LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
110 × 84.5 mm161 parts2LNo license0
The TEENSY41 in open source designs
The gallery holds 16 open source boards using the TEENSY41 from 5 GitHub repositories; a typical one measures about 138 × 114 mm and carries around 211 components.
63% use four copper layers or more, and 13% carry an open source license.
The most starred is Control rev3 by PaulStoffregen.
Microcontrollers on boards using the TEENSY41
What boards using the TEENSY41 are built for
TEENSY41: common questions
Where can I find a TEENSY41 reference design?
Each of the 16 boards on this page is a real design using the TEENSY41. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TEENSY41 use?
Most are built on NXP (16).
How big is a typical board using the TEENSY41?
The median is 138 × 114 mm, and 38% are two-layer designs.
What is the most popular open source board using the TEENSY41?
By GitHub stars, Control rev3 by PaulStoffregen, with 160 stars.
Can I simulate one of these boards using the TEENSY41 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.