7 open source boards using the TL431AIDBZR
Real designs built with the TL431AIDBZR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AI-PCB
ChengminLi
100 × 76 mm66 parts2LCC-BY-4.05AP2100-power proto
imagestream
150 × 160 mm340 parts6LMIT1STM32
Dcdc converter
shousei01
160 × 105 mm260 parts4LNo license0AVR/Arduino
InverterBoostConverter
datacrystals
450 × 150 mm225 parts2LNo license0A1-4RD
mkol-ME
120 × 94 mm93 parts4LMIT0STM32
Wallet dmm
ArgonautGit
85.6 × 54 mm61 parts2LNo license0RF80 V1R1 - STANDARD JLCPCB EVALUATION CANDIDATE
DD1SB
150 × 110 mm199 parts2LMIT0
How designs wire the TL431AIDBZR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TL431AIDBZR connects to, and the resistors, capacitors and other passives placed on it.
- The K pin has a series resistor on 5 of 7 designs, most often 1 kΩ (then 0 Ω).
- The A pin is tied to GND on 5 of 7 designs (a signal on 2).
- The REF pin has a series resistor on 4 of 7 designs, most often 10 kΩ (then 39 kΩ).
- The REF pin has a resistor to GND on 4 of 7 designs, most often 10 kΩ (then 5.23 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Kpin 1 | Connected to: Signal 71% · 3V 29% |
|
| REFpin 2 | Connected to: Signal 86% |
|
| Apin 3 | Connected to: GND 71% · a signal 29% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AI-PCB-layout by ChengminLi, AP2100-power proto by imagestream, Wallet dmm by ArgonautGit and InverterBoostConverter by datacrystals.
The TL431AIDBZR in open source designs
The gallery holds 7 open source boards using the TL431AIDBZR from 7 GitHub repositories; a typical one measures about 150 × 105 mm and carries around 199 components.
57% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is AI-PCB-layout by ChengminLi.
Microcontrollers on boards using the TL431AIDBZR
What boards using the TL431AIDBZR are built for
TL431AIDBZR: common questions
Where can I find a TL431AIDBZR reference design?
Each of the 7 boards on this page is a real design using the TL431AIDBZR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TL431AIDBZR K pin?
The K pin has a series resistor on 5 of 7 designs, most often 1 kΩ (then 0 Ω). Counted from the KiCad layouts of 7 open source designs using the TL431AIDBZR.
How is the TL431AIDBZR A pin connected?
The A pin is tied to GND on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the TL431AIDBZR.
What resistor goes on the TL431AIDBZR REF pin?
The REF pin has a series resistor on 4 of 7 designs, most often 10 kΩ (then 39 kΩ). Counted from the KiCad layouts of 7 open source designs using the TL431AIDBZR.
Which microcontrollers do boards using the TL431AIDBZR use?
Most are built on STM32 (2) and AVR/Arduino (1).
How big is a typical board using the TL431AIDBZR?
The median is 150 × 105 mm, and 57% are two-layer designs.
What is the most popular open source board using the TL431AIDBZR?
By GitHub stars, AI-PCB-layout by ChengminLi, with 5 stars.
Can I simulate one of these boards using the TL431AIDBZR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.