12 open source boards using the TLV493D
Real designs built with the TLV493D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
VariLev
DDeGonge
100 × 100 mm66 parts2LMIT26Microchip SAM
OTRESC-BLDC-Controller-Hardware
otrebla333
33.3 × 33.3 mm64 parts2LGPL-3.08Nordic nRF
Revolutetestboard
tongtongwang86
54 × 85.7 mm254 parts4LCC-BY-NC-4.05STM32
HaptiCAD Base
EmielV2002
90 × 90 mm92 parts4LApache-2.01Microchip SAM
Axis Basic
andrew153d
42 × 42 mm67 parts4LNo license1Panelize
juarendra
86.5 × 98.6 mm285 parts2LNo license0STM32
Smart Knob
danielzyy
50 × 50 mm68 parts4LApache-2.00TLV493D-rod
HackableElectronics
100 × 7 mm6 parts2LCC0-1.00Ethernet HAT
andrew153d
42 × 42 mm40 parts4LNo license1Panelize 2
juarendra
88.3 × 81.7 mm228 parts2LNo license0RP2040/RP2350
ThrottleControllerMain
asfarley
45.3 × 46 mm40 parts2LNo license0Positron tlv493d
juarendra
28.5 × 19.3 mm19 parts2LNo license0
How designs wire the TLV493D
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TLV493D connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
- The SCL/INT pin has a pull-up to 3.3V on 8 of 9 designs, most often 10 kΩ (then 4.7 kΩ).
- The SDA/ADDR pin has a pull-up to 3.3V on 8 of 9 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCL/INTpin 1 | Connected to: The microcontroller 56%, a connector 33% |
|
| GNDpin 2, 3, 5 | Connected to: GND 100% | — |
| VDDpin 4 | Connected to: 3.3V 78% · a signal 22% |
|
| SDA/ADDRpin 6 | Connected to: The microcontroller 56%, a connector 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include VariLev by DDeGonge, OTRESC-BLDC-Controller-Hardware by otrebla333, Revolutetestboard by tongtongwang86 and Axis Basic by andrew153d.
The TLV493D in open source designs
The gallery holds 12 open source boards using the TLV493D from 9 GitHub repositories; a typical one measures about 52 × 48 mm and carries around 67 components.
58% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is VariLev by DDeGonge.
Parts used alongside the TLV493D
Microcontrollers on boards using the TLV493D
What boards using the TLV493D are built for
TLV493D: common questions
Where can I find a TLV493D reference design?
Each of the 12 boards on this page is a real design using the TLV493D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TLV493D VDD pin?
The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the TLV493D.
What pull-up resistor is used on the TLV493D SCL/INT pin?
The SCL/INT pin has a pull-up to 3.3V on 8 of 9 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 9 open source designs using the TLV493D.
What pull-up resistor is used on the TLV493D SDA/ADDR pin?
The SDA/ADDR pin has a pull-up to 3.3V on 8 of 9 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 9 open source designs using the TLV493D.
Which microcontrollers do boards using the TLV493D use?
Most are built on Microchip SAM (3), STM32 (2), Nordic nRF (1) and RP2040/RP2350 (1).
How big is a typical board using the TLV493D?
The median is 52 × 48 mm, and 58% are two-layer designs.
What is the most popular open source board using the TLV493D?
By GitHub stars, VariLev by DDeGonge, with 26 stars.
Can I simulate one of these boards using the TLV493D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.