11 open source boards using the TLV8802
Real designs built with the TLV8802, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32SenseCam rev1
Appiko
45 × 70 mm62 parts2LCERN-OHL-1.22
Nordic nRFSensePi rev5 main
56.5 × 40 mm53 parts2LCERN-OHL-1.22
Nordic nRFSenseEle SMA rev1
49 × 45 mm51 parts2LCERN-OHL-1.22
Nordic nRFSenseEle PCB Antenna rev2
92.7 × 30 mm50 parts2LCERN-OHL-1.22
Nordic nRFSenseBe rev2
60 × 40 mm43 parts2LCERN-OHL-1.22
Nordic nRFSense rev4
68 × 52 mm41 parts2LCERN-OHL-1.22
Nordic nRFSenseCam Adapter rev1
90 × 46 mm36 parts2LCERN-OHL-1.22
Nordic nRFSenseRx rev1
96 × 69 mm36 parts2LCERN-OHL-1.22
Nordic nRFSTCS2A driver rev1
65 × 61 mm34 parts2LCERN-OHL-1.22
Nordic nRFSenseble rev1
58 × 39 mm28 parts2LCERN-OHL-1.22
Nordic nRFSenseCam STCS2A rev1
65 × 26 mm28 parts2LCERN-OHL-1.22
The TLV8802 in open source designs
The gallery holds 11 open source boards using the TLV8802 from 1 GitHub repository; a typical one measures about 65 × 45 mm and carries around 41 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is SenseCam rev1 by Appiko.
Microcontrollers on boards using the TLV8802
What boards using the TLV8802 are built for
TLV8802: common questions
Where can I find a TLV8802 reference design?
Each of the 11 boards on this page is a real design using the TLV8802. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLV8802 use?
Most are built on Nordic nRF (10) and STM32 (1).
How big is a typical board using the TLV8802?
The median is 65 × 45 mm, and 100% are two-layer designs.
What is the most popular open source board using the TLV8802?
By GitHub stars, SenseCam rev1 by Appiko, with 2 stars.
Can I simulate one of these boards using the TLV8802 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.