5 open source boards using the TMC2130-LA
Real designs built with the TMC2130-LA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
MM-control-2.0
prusa3d
106 × 45 mm161 parts4LNo license42AVR/Arduino
CW-CONTROLLER
prusa3d
126 × 57 mm247 parts4LNo license3Microchip SAM
Step
versioduo
150 × 35 mm105 parts6LNo license0AVR/Arduino
Bloom pcb designs
Geil-X
42 × 46 mm37 parts4LNo license0AVR/Arduino
MM-control
sl1pkn07
106 × 45 mm161 parts4LNo license0
How designs wire the TMC2130-LA
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TMC2130-LA connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_IO_8 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- The BRB_14 pin has a resistor to GND on 5 of 5 designs, most often 110 mΩ.
- The 5VOUT_25 pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 4.7 µF).
- The VCC_26 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 470 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CLK_1pin 1 | Connected to: GND 100% | — |
| SDI_CFG1_4pin 4 | Connected to: The microcontroller 100%, a connector 80%, TMC2130-LA 60% |
|
| SDO_CFG0_5pin 5 | Connected to: The microcontroller 100%, a connector 80%, TMC2130-LA 60% |
|
| VCC_IO_8pin 8 | Connected to: 5V 100% |
|
| NC_9pin 9 | Connected to: Not connected 100% | — |
| SPI_MODE_10pin 10 | Connected to: Not connected 80% · a signal 20% | — |
| NC_11pin 11 | Connected to: GND 80% · not connected 20% | — |
| GNDP_12pin 12 | Connected to: GND 100% | — |
| OB1_13pin 13 | Connected to: A connector 40% |
|
| BRB_14pin 14 | Connected to: Signal 100% |
|
| OB2_15pin 15 | Connected to: A connector 40% |
|
| VS_16pin 16 | Connected to: 24V 80% · a signal 20% |
|
| DCO_17pin 17 | Connected to: Not connected 80% · GND 20% | — |
| DCEN_CFG4_18pin 18 | Connected to: GND 80% · a signal 20% | — |
| DCIN_CFG5_19pin 19 | Connected to: Not connected 80% · a signal 20% | — |
| DIAG0_20pin 20 | Connected to: The microcontroller 40% · not connected 20% |
|
| DIAG1_21pin 21 | Connected to: The microcontroller 40% · not connected 20% |
|
| AIN_IREF_23pin 23 | Connected to: Not connected 80% · a signal 20% | — |
| GNDA_24pin 24 | Connected to: GND 100% | — |
| 5VOUT_25pin 25 | Connected to: Signal 60% · 5V 40% |
|
| VCC_26pin 26 | Connected to: 5V 60% · a signal 40% |
|
| CPO_27pin 27 | Connected to: Signal 100% |
|
| CPI_28pin 28 | Connected to: Signal 100% |
|
| VCP_29pin 29 | Connected to: Signal 100% |
|
| VSA_30pin 30 | Connected to: 5V 100% |
|
| VS_31pin 31 | Connected to: 24V 80% · a signal 20% |
|
| OA2_32pin 32 | Connected to: A connector 40% |
|
| BRA_33pin 33 | Connected to: Signal 100% |
|
| OA1_34pin 34 | Connected to: A connector 40% |
|
| GNDP_35pin 35 | Connected to: GND 100% | — |
| TST_MODE_36pin 36 | Connected to: GND 100% | — |
| PAD_37pin 37 | Connected to: GND 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MM-control-2.0 by prusa3d, CW-CONTROLLER-PCB by prusa3d, Bloom pcb designs by Geil-X and MM-control by sl1pkn07.
The TMC2130-LA in open source designs
The gallery holds 5 open source boards using the TMC2130-LA from 5 GitHub repositories; a typical one measures about 106 × 45 mm and carries around 161 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is MM-control-2.0 by prusa3d.
Parts used alongside the TMC2130-LA
Microcontrollers on boards using the TMC2130-LA
What boards using the TMC2130-LA are built for
TMC2130-LA: common questions
Where can I find a TMC2130-LA reference design?
Each of the 5 boards on this page is a real design using the TMC2130-LA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TMC2130-LA VCC_IO_8 pin?
The VCC_IO_8 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TMC2130-LA.
What resistor goes on the TMC2130-LA BRB_14 pin?
The BRB_14 pin has a resistor to GND on 5 of 5 designs, most often 110 mΩ. Counted from the KiCad layouts of 5 open source designs using the TMC2130-LA.
How is the TMC2130-LA 5VOUT_25 pin connected?
The 5VOUT_25 pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the TMC2130-LA.
Which microcontrollers do boards using the TMC2130-LA use?
Most are built on AVR/Arduino (4) and Microchip SAM (1).
How big is a typical board using the TMC2130-LA?
The median is 106 × 45 mm, and 0% are two-layer designs.
What is the most popular open source board using the TMC2130-LA?
By GitHub stars, MM-control-2.0 by prusa3d, with 42 stars.
Can I simulate one of these boards using the TMC2130-LA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.