4 open source boards using the TP6841S6
Real designs built with the TP6841S6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Module17
M17-Project
100 × 83 mm186 parts4LCERN-OHL-W-2.0129ESP32
Bldc sic
klaus-liebler
60 × 63 mm113 parts2LMIT0ESP32
Bldc
klaus-liebler
58 × 60 mm112 parts2LMIT0Panelized-2layer
openconcepts-ar
74.6 × 73.2 mm81 parts2LCustom license1
The TP6841S6 in open source designs
The gallery holds 4 open source boards using the TP6841S6 from 3 GitHub repositories; a typical one measures about 67.3 × 68.1 mm and carries around 113 components.
75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Module17 by M17-Project.
What boards using the TP6841S6 are built for
TP6841S6: common questions
Where can I find a TP6841S6 reference design?
Each of the 4 boards on this page is a real design using the TP6841S6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TP6841S6 use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the TP6841S6?
The median is 67.3 × 68.1 mm, and 75% are two-layer designs.
What is the most popular open source board using the TP6841S6?
By GitHub stars, Module17 by M17-Project, with 129 stars.
Can I simulate one of these boards using the TP6841S6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.