4 open source boards using the TPD2E2U06
Real designs built with the TPD2E2U06, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
GiantKnob
mathisschmieder
100 × 70 mm105 parts2LNo license2ESP32
Windpup
barzamin
50.3 × 46.2 mm38 parts2LNo license1RP2040/RP2350
Dashdashv2
Churrosoft
85.4 × 50.1 mm89 parts4LMIT1STM32
Unified
ervanalb
48.3 × 20.3 mm39 parts4LNo license8
The TPD2E2U06 in open source designs
The gallery holds 4 open source boards using the TPD2E2U06 from 4 GitHub repositories; a typical one measures about 67.8 × 48.2 mm and carries around 64 components.
50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Unified by ervanalb.
Microcontrollers on boards using the TPD2E2U06
What boards using the TPD2E2U06 are built for
TPD2E2U06: common questions
Where can I find a TPD2E2U06 reference design?
Each of the 4 boards on this page is a real design using the TPD2E2U06. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPD2E2U06 use?
Most are built on AVR/Arduino (1), ESP32 (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TPD2E2U06?
The median is 67.8 × 48.2 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPD2E2U06?
By GitHub stars, Unified by ervanalb, with 8 stars.
Can I simulate one of these boards using the TPD2E2U06 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.