5 open source boards using the TPS22975DSGR

Real designs built with the TPS22975DSGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TPS22975DSGR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS22975DSGR connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN_1 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 22 µF).
  • The VIN_2 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 22 µF).
  • The VBIAS_4 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 100 nF).
  • The VOUT_7 pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 22 µF).
VIN_1pin 1Connected to: 5V 100%
  • Decoupling capacitor on 100% · 1 µF (3), 22 µF (3), 100 nF (1)
VIN_2pin 2Connected to: 5V 100%
  • Decoupling capacitor on 100% · 1 µF (3), 22 µF (2), 100 nF (1)
ON_3pin 3Connected to: Signal 80% · 3.3V 20%
  • Pull-up to 5V on 40% · 100 kΩ (2)
  • Resistor to GND on 40% · 43.2 kΩ (1), 100 kΩ (1)
  • Capacitor to GND on 40% · 100 nF (1), 10 nF (1)
  • Series resistor on 40% · 100 kΩ (2), 1 MΩ (1)
VBIAS_4pin 4Connected to: 5V 100%
  • Decoupling capacitor on 100% · 1 µF (3), 100 nF (2), 22 µF (2)
GND_5pin 5Connected to: GND 100%
CT_6pin 6Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 80% · 10 nF (3), 1.2 nF (1)
VOUT_7pin 7Connected to: Signal 60% · 5V 40%
  • Capacitor to GND on 100% · 100 nF (5), 22 µF (4), 10 µF (2)
  • Series resistor on 40% · 100 kΩ (4)
VOUT_8pin 8Connected to: Signal 60% · 5V 40%
  • Capacitor to GND on 100% · 100 nF (5), 22 µF (4), 10 µF (2)
  • Series resistor on 40% · 100 kΩ (4)
EP_9pin 9Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CanardBoard by waterloo-rocketry, Esp32-color lamp stand by liyanage, Isolated reindvstrialize usb hub by American-Embedded and Photo frame hardware by Benv-B.

The TPS22975DSGR in open source designs

The gallery holds 5 open source boards using the TPS22975DSGR from 5 GitHub repositories; a typical one measures about 100 × 70 mm and carries around 140 components.

60% use four copper layers or more, and 60% carry an open source license.

The most starred is CanardBoard by waterloo-rocketry.

Parts used alongside the TPS22975DSGR

Microcontrollers on boards using the TPS22975DSGR

What boards using the TPS22975DSGR are built for

TPS22975DSGR: common questions

Where can I find a TPS22975DSGR reference design?

Each of the 5 boards on this page is a real design using the TPS22975DSGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS22975DSGR VIN_1 pin?

The VIN_1 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the TPS22975DSGR.

What decoupling capacitors do designs use on the TPS22975DSGR VIN_2 pin?

The VIN_2 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the TPS22975DSGR.

What decoupling capacitors do designs use on the TPS22975DSGR VBIAS_4 pin?

The VBIAS_4 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TPS22975DSGR.

Which microcontrollers do boards using the TPS22975DSGR use?

Most are built on ESP32 (2), WCH CH32/CH55x (1) and STM32 (1).

How big is a typical board using the TPS22975DSGR?

The median is 100 × 70 mm, and 40% are two-layer designs.

What is the most popular open source board using the TPS22975DSGR?

By GitHub stars, CanardBoard by waterloo-rocketry, with 15 stars.

Can I simulate one of these boards using the TPS22975DSGR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part