3 open source boards using the TPS26630RGER
Real designs built with the TPS26630RGER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Hub
Bruhdows
148 × 78 mm309 parts4LNo license1RP2040/RP2350
Spark
ratmuds
82 × 55 mm196 parts4LNo license1Ito controller
luciddreams
160 × 110 mm202 parts4LNo license0
The TPS26630RGER in open source designs
The gallery holds 3 open source boards using the TPS26630RGER from 3 GitHub repositories; a typical one measures about 148 × 78 mm and carries around 202 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Hub by Bruhdows.
Parts used alongside the TPS26630RGER
Microcontrollers on boards using the TPS26630RGER
What boards using the TPS26630RGER are built for
TPS26630RGER: common questions
Where can I find a TPS26630RGER reference design?
Each of the 3 boards on this page is a real design using the TPS26630RGER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS26630RGER use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TPS26630RGER?
The median is 148 × 78 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS26630RGER?
By GitHub stars, Hub by Bruhdows, with 1 stars.
Can I simulate one of these boards using the TPS26630RGER before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.