7 open source boards using the TPS3430WDRCR
Real designs built with the TPS3430WDRCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Aper-Oculus
ApotheoTech
147.4 × 90 mm557 parts16LGPL-3.032STM32
Esc rev b
iamdarshg
173.8 × 282.9 mm687 parts4LNo license2PSEC5 Ctrl Board
AhanDatta
197 × 130 mm518 parts10LNo license0ESP32
Main routed
0x63616c
54 × 71 mm194 parts4LNo license0STM32
Esc rev b.before hand power replicate
iamdarshg
170 × 172.2 mm681 parts6LNo license2ESP32
Main test
0x63616c
54 × 71 mm194 parts4LNo license0ESP32
Controller test
0x63616c
61 parts2LNo license0
The TPS3430WDRCR in open source designs
The gallery holds 7 open source boards using the TPS3430WDRCR from 4 GitHub repositories; a typical one measures about 158.7 × 110 mm and carries around 518 components.
86% use four copper layers or more, and 14% carry an open source license.
The most starred is Aper-Oculus by ApotheoTech.
Parts used alongside the TPS3430WDRCR
What boards using the TPS3430WDRCR are built for
TPS3430WDRCR: common questions
Where can I find a TPS3430WDRCR reference design?
Each of the 7 boards on this page is a real design using the TPS3430WDRCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS3430WDRCR?
The MP5016HGQH-Z, MPM3840GQV-Z, SN74AVC2T245RSWR, TPD4S012DRYR and TPS70933DBVR appear in the most repositories here.
Which microcontrollers do boards using the TPS3430WDRCR use?
Most are built on ESP32 (3), STM32 (2) and PIC (1).
How big is a typical board using the TPS3430WDRCR?
The median is 158.7 × 110 mm, and 14% are two-layer designs.
What is the most popular open source board using the TPS3430WDRCR?
By GitHub stars, Aper-Oculus by ApotheoTech, with 32 stars.
Can I simulate one of these boards using the TPS3430WDRCR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.