6 open source boards using the TPS55340PWPR

Real designs built with the TPS55340PWPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TPS55340PWPR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS55340PWPR connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pins have a inductor on 5 of 5 designs, most often 6.8 µH (then 10 µH).
  • The SS pin has a capacitor to GND on 5 of 5 designs, most often 47 nF (then 100 nF).
  • The COMP pin has a series resistor on 5 of 5 designs, most often 2.55 kΩ (then 10 kΩ).
  • The FB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 9.76 kΩ).
SWpin 1, 2Connected to: Signal 100%
  • Inductor on 100% · 6.8 µH (4), 10 µH (2), 7.8 µH (2)
VINpin 3Connected to: 7.5V 60% · a signal 40%
  • Decoupling capacitor on 60% · 1 µF (2), 4.7 µF (2), 10 µF (1)
  • Inductor on 40% · 10 µH (1), 6.8 µH (1)
ENpin 4Connected to: A connector 40% · 7.5V 20%
  • Series resistor on 40% · 4.7 kΩ (1), 100 kΩ (1)
  • Resistor to GND on 40% · 10 kΩ (1), 100 kΩ (1)
SSpin 5Connected to: Signal 100%
  • Capacitor to GND on 100% · 47 nF (2), 100 nF (1), 10 nF (1)
SYNCpin 6Connected to: GND 80% · not connected 20%
AGNDpin 7Connected to: GND 100%
COMPpin 8Connected to: Signal 100%
  • Series resistor on 100% · 2.55 kΩ (2), 10 kΩ (1), 2.32 kΩ (1)
  • Capacitor to GND on 60% · 100 pF (2), 1.5 nF (1)
FBpin 9Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (4), 9.76 kΩ (1)
  • Pull-up to 15V on 60% · 137 kΩ (1), 187 kΩ (1), 86.6 kΩ (1)
  • Series resistor on 40% · 39 kΩ (1), 30.1 kΩ (1)
FREQpin 10Connected to: Signal 100%
  • Resistor to GND on 100% · 78.7 kΩ (2), 40 kΩ (1), 60.4 kΩ (1)
NCpin 11Connected to: Not connected 60% · GND 40%
PGNDpin 12, 13, 14Connected to: GND 100%
EPADpin 15Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Power base by anuejn, MicroDeflect by tullulah, Hydroponics by imagestream and Wooden Clock - main board by tibm.

The TPS55340PWPR in open source designs

The gallery holds 6 open source boards using the TPS55340PWPR from 5 GitHub repositories; a typical one measures about 99.7 × 97 mm and carries around 110 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Axiom Micro Mainboard by anuejn.

Parts used alongside the TPS55340PWPR

Microcontrollers on boards using the TPS55340PWPR

What boards using the TPS55340PWPR are built for

TPS55340PWPR: common questions

Where can I find a TPS55340PWPR reference design?

Each of the 6 boards on this page is a real design using the TPS55340PWPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS55340PWPR SW pin connected?

The SW pins have a inductor on 5 of 5 designs, most often 6.8 µH (then 10 µH). Counted from the KiCad layouts of 5 open source designs using the TPS55340PWPR.

How is the TPS55340PWPR SS pin connected?

The SS pin has a capacitor to GND on 5 of 5 designs, most often 47 nF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TPS55340PWPR.

What resistor goes on the TPS55340PWPR COMP pin?

The COMP pin has a series resistor on 5 of 5 designs, most often 2.55 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS55340PWPR.

Which microcontrollers do boards using the TPS55340PWPR use?

Most are built on ESP32 (2).

How big is a typical board using the TPS55340PWPR?

The median is 99.7 × 97 mm, and 50% are two-layer designs.

What is the most popular open source board using the TPS55340PWPR?

By GitHub stars, Axiom Micro Mainboard by anuejn, with 38 stars.

Can I simulate one of these boards using the TPS55340PWPR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part