3 open source boards using the TPS60402DBV

Real designs built with the TPS60402DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The TPS60402DBV in open source designs

The gallery holds 3 open source boards using the TPS60402DBV from 2 GitHub repositories; a typical one measures about 16 × 28 mm and carries around 43 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is MyoBand Main by SonDinh23.

Parts used alongside the TPS60402DBV

Microcontrollers on boards using the TPS60402DBV

TPS60402DBV: common questions

Where can I find a TPS60402DBV reference design?

Each of the 3 boards on this page is a real design using the TPS60402DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS60402DBV use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the TPS60402DBV?

The median is 16 × 28 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS60402DBV?

By GitHub stars, MyoBand Main by SonDinh23, with 4 stars.

Can I simulate one of these boards using the TPS60402DBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part