4 open source boards using the TPS61088
Real designs built with the TPS61088, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
SuperPower-RPi
SensorsIot
65 × 56.5 mm98 parts2LCERN-OHL-W-2.0601ZC95 MKII
CrashOverride85
191.5 × 76 mm319 parts2LGPL-3.0115ESP32
ControlBoard
paradise-fi
76 × 76 mm207 parts4LCC-BY-NC-4.042PanelControls
CrashOverride85
106 × 37.8 mm40 parts2LGPL-3.0115
The TPS61088 in open source designs
The gallery holds 4 open source boards using the TPS61088 from 3 GitHub repositories; a typical one measures about 91 × 66.2 mm and carries around 153 components.
75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is SuperPower-RPi-KiCAD by SensorsIot.
What boards using the TPS61088 are built for
TPS61088: common questions
Where can I find a TPS61088 reference design?
Each of the 4 boards on this page is a real design using the TPS61088. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS61088 use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the TPS61088?
The median is 91 × 66.2 mm, and 75% are two-layer designs.
What is the most popular open source board using the TPS61088?
By GitHub stars, SuperPower-RPi-KiCAD by SensorsIot, with 601 stars.
Can I simulate one of these boards using the TPS61088 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.