3 open source boards using the TPS61090RSAR
Real designs built with the TPS61090RSAR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Thesis
Dylancyclone
158.3 × 110 mm78 parts2LNo license1STM32
PCBMints2025
mi3nts
80 × 80 mm50 parts4LMIT0DABO2
lkesteloot
96 × 34.1 mm62 parts2LApache-2.079
The TPS61090RSAR in open source designs
The gallery holds 3 open source boards using the TPS61090RSAR from 3 GitHub repositories; a typical one measures about 96 × 80 mm and carries around 62 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is DABO2 by lkesteloot.
Microcontrollers on boards using the TPS61090RSAR
TPS61090RSAR: common questions
Where can I find a TPS61090RSAR reference design?
Each of the 3 boards on this page is a real design using the TPS61090RSAR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS61090RSAR use?
Most are built on Raspberry Pi (1) and STM32 (1).
How big is a typical board using the TPS61090RSAR?
The median is 96 × 80 mm, and 67% are two-layer designs.
What is the most popular open source board using the TPS61090RSAR?
By GitHub stars, DABO2 by lkesteloot, with 79 stars.
Can I simulate one of these boards using the TPS61090RSAR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.