2 open source boards using the TPS62112

Real designs built with the TPS62112, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TPS62112 in open source designs

The gallery holds 2 open source boards using the TPS62112 from 2 GitHub repositories; a typical one measures about 99.9 × 97.3 mm and carries around 288 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Controller rev5.0 flat by oresat.

Parts used alongside the TPS62112

Microcontrollers on boards using the TPS62112

What boards using the TPS62112 are built for

TPS62112: common questions

Where can I find a TPS62112 reference design?

Each of the 2 boards on this page is a real design using the TPS62112. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPS62112?

The MAX4211FETE, MAX7310ATE and MIC842LYC5 appear in the most repositories here.

Which microcontrollers do boards using the TPS62112 use?

Most are built on STM32 (1).

How big is a typical board using the TPS62112?

The median is 99.9 × 97.3 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS62112?

By GitHub stars, Controller rev5.0 flat by oresat, with 21 stars.

Can I simulate one of these boards using the TPS62112 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part