14 open source boards using the MAX4211FETE
Real designs built with the MAX4211FETE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OreSat Star Tracker Card
oresat
99.8 × 94.6 mm163 parts4LNo license49OreSat GPS Card
oresat
99.8 × 94.6 mm210 parts4LCERN-OHL-S-2.034OreSat Battery Card
oresat
99.8 × 94.6 mm267 parts4LNo license27STM32
Oresat adcs card
oresat
99.8 × 94.6 mm579 parts4LGPL-2.021Oresat live card
oresat
99.8 × 94.6 mm377 parts4LNo license8OreSat CFC Processor Card
oresat
99.8 × 94.6 mm163 parts4LCERN-OHL-S-2.02STM32
Oresat batteries
BrownSpaceEngineering
88 × 84.9 mm304 parts4LNo license0Rev6.0 flat powerstage
oresat
100 × 100 mm263 parts4LGPL-2.021OreSat MCXN Proto Card
oresat
99.8 × 94.6 mm117 parts4LNo license8CFC Sensor Card
oresat
50.7 × 24.3 mm149 parts4LCERN-OHL-S-2.02OreSat Reaction Wheel Card
oresat
99.8 × 94.6 mm258 parts4LGPL-2.021STM32
Controller rev5.0 flat
oresat
100 × 100 mm198 parts4LGPL-2.021OreSat Mag Card
oresat
99.8 × 94.6 mm175 parts4LGPL-2.021STM32
Rev6.0 flat controlstage
oresat
57.6 × 80.1 mm134 parts4LGPL-2.021
How designs wire the MAX4211FETE
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MAX4211FETE connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_1 pin has a capacitor to GND on 6 of 7 designs, most often 1 µF (then 100 nF).
- The VCC_1 pin has a resistor to GND on 6 of 7 designs, most often 10 kΩ.
- The VCC_1 pin has a series resistor on 6 of 7 designs, most often 2.7 kΩ (then 4.7 kΩ).
- The LE_3 pin has a series resistor on 6 of 7 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCC_1pin 1 | Connected to: TS5A21366DCUR 71%, MAX7310ATE+ 43%, MAX7310ATE 29% |
|
| IN_2pin 2 | Connected to: TS5A21366DCUR 29% |
|
| LE_3pin 3 | Connected to: Signal 100% |
|
| COUT1_4pin 4 | Connected to: Signal 100% |
|
| INHIBIT_5pin 5 | Connected to: Signal 86% |
|
| COUT2_6pin 6 | Connected to: Signal 86% |
|
| GND_7pin 7 | Connected to: GND 100% | — |
| CIN2+_8pin 8 | Connected to: Signal 100% |
|
| CIN2-_9pin 9 | Connected to: MAX7310ATE+ 50%, MAX7310ATE 33% |
|
| CIN1+_10pin 10 | Connected to: Signal 100% |
|
| CIN1-_11pin 11 | Connected to: Signal 100% |
|
| REF_12pin 12 | Connected to: Signal 100% |
|
| IOUT_14pin 14 | Connected to: Signal 100% |
|
| RS-_15pin 15 | Connected to: Signal 100% |
|
| RS+_16pin 16 | Connected to: Signal 100% |
|
| GND_17pin 17 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OreSat Star Tracker Card by oresat, OreSat GPS Card by oresat, OreSat Battery Card by oresat and Controller rev5.0 flat by oresat.
The MAX4211FETE in open source designs
The gallery holds 14 open source boards using the MAX4211FETE from 7 GitHub repositories; a typical one measures about 99.8 × 94.6 mm and carries around 204 components.
100% use four copper layers or more, and 64% carry an open source license.
The most starred is OreSat Star Tracker Card by oresat.
Parts used alongside the MAX4211FETE
Microcontrollers on boards using the MAX4211FETE
What boards using the MAX4211FETE are built for
MAX4211FETE: common questions
Where can I find a MAX4211FETE reference design?
Each of the 14 boards on this page is a real design using the MAX4211FETE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MAX4211FETE VCC_1 pin connected?
The VCC_1 pin has a capacitor to GND on 6 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the MAX4211FETE.
What resistor goes on the MAX4211FETE LE_3 pin?
The LE_3 pin has a series resistor on 6 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the MAX4211FETE.
What resistor goes on the MAX4211FETE COUT1_4 pin?
The COUT1_4 pin has a series resistor on 6 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the MAX4211FETE.
What parts are used alongside the MAX4211FETE?
The MIC842LYC5-TR, TS5A21366DCUR, MAX7310ATE+, TCAN330GDCNT and TPS62111RSA appear in the most repositories here.
Which microcontrollers do boards using the MAX4211FETE use?
Most are built on STM32 (4).
How big is a typical board using the MAX4211FETE?
The median is 99.8 × 94.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the MAX4211FETE?
By GitHub stars, OreSat Star Tracker Card by oresat, with 49 stars.
Can I simulate one of these boards using the MAX4211FETE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.