10 open source boards using the TPS62912
Real designs built with the TPS62912, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Opensync before chb h placement-20260915
ErichZimmer
160 × 100 mm233 parts2LCERN-OHL-S-2.04Raspberry Pi
Masters thesis lora gateway compute module cubesat payload
dpmj
90.2 × 95.9 mm338 parts6LCERN-OHL-S-2.02RP2040/RP2350
Opensync
ErichZimmer
160 × 100 mm220 parts4LCERN-OHL-S-2.04RP2040/RP2350
Agent asc
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Agent entry vias
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Before
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Candidate
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Final candidate
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Led draft
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Led stitched
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04
The TPS62912 in open source designs
The gallery holds 10 open source boards using the TPS62912 from 2 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 217 components.
90% use four copper layers or more, and 100% carry an open source license.
The most starred is Opensync before chb h placement-20260915 by ErichZimmer.
Microcontrollers on boards using the TPS62912
What boards using the TPS62912 are built for
TPS62912: common questions
Where can I find a TPS62912 reference design?
Each of the 10 boards on this page is a real design using the TPS62912. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS62912 use?
Most are built on RP2040/RP2350 (9) and Raspberry Pi (1).
How big is a typical board using the TPS62912?
The median is 160 × 100 mm, and 10% are two-layer designs.
What is the most popular open source board using the TPS62912?
By GitHub stars, Opensync before chb h placement-20260915 by ErichZimmer, with 4 stars.
Can I simulate one of these boards using the TPS62912 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.