4 open source boards using the TPS709
Real designs built with the TPS709, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Revolutetestboard
tongtongwang86
54 × 85.7 mm254 parts4LCC-BY-NC-4.05AVR/Arduino
NoahESC
zosko
32 × 43.7 mm48 parts2LNo license310000006 SE
gitlunard
45.9 × 32.3 mm38 parts4LNo license0PIC
TinySensor 001 MCU
jirihusak
35 × 35 mm40 parts2LGPL-3.04
The TPS709 in open source designs
The gallery holds 4 open source boards using the TPS709 from 4 GitHub repositories; a typical one measures about 40.4 × 39.3 mm and carries around 44 components.
50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Revolutetestboard by tongtongwang86.
Microcontrollers on boards using the TPS709
What boards using the TPS709 are built for
TPS709: common questions
Where can I find a TPS709 reference design?
Each of the 4 boards on this page is a real design using the TPS709. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS709 use?
Most are built on AVR/Arduino (1), Nordic nRF (1) and PIC (1).
How big is a typical board using the TPS709?
The median is 40.4 × 39.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS709?
By GitHub stars, Revolutetestboard by tongtongwang86, with 5 stars.
Can I simulate one of these boards using the TPS709 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.