11 open source boards using the TPS7A3301RGWR

Real designs built with the TPS7A3301RGWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TPS7A3301RGWR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS7A3301RGWR connects to, and the resistors, capacitors and other passives placed on it.

  • The NC_1 pin is left unconnected on 7 of 7 designs.
  • The NC_2 pin is left unconnected on 7 of 7 designs.
  • The NC_3 pin is left unconnected on 7 of 7 designs.
  • The NC_4 pin is left unconnected on 7 of 7 designs.
NC_1pin 2Connected to: Not connected 100%
FBpin 3Connected to: Signal 86%
  • Resistor to GND on 57% · 100 kΩ (1), 102 kΩ (1), 220 kΩ (1)
  • Series capacitor on 43% · 10 nF (3)
  • Series resistor on 43% · 1.24 MΩ (2), 105 kΩ (2), 330 kΩ (1)
  • Pull-up to -5V on 43% · 332 kΩ (1), 715 kΩ (1), 162 kΩ (1)
  • Capacitor to the supply on 43% · 10 nF (3)
NC_2pin 4Connected to: Not connected 100%
NC_3pin 5Connected to: Not connected 100%
NC_4pin 6Connected to: Not connected 100%
GNDpin 7Connected to: GND 71% · a signal 29%
NC_5pin 8Connected to: Not connected 100%
NC_6pin 9Connected to: Not connected 100%
NC_7pin 10Connected to: Not connected 100%
NC_8pin 11Connected to: Not connected 100%
NC_9pin 12Connected to: Not connected 100%
ENpin 13Connected to: Signal 86%
  • Series resistor on 71% · 10 Ω (2), 0 Ω (1), 82 kΩ (1)
  • Capacitor to GND on 57% · 10 µF (3), 22 µF (2), 100 nF (1)
NR/SSpin 14Connected to: Signal 86%
  • Capacitor to GND on 57% · 1 µF (2), 100 nF (1), 3.3 µF (1)
INpin 15, 16Connected to: Signal 86%
  • Capacitor to GND on 71% · 10 µF (8), 100 nF (6), 22 µF (4)
  • Series resistor on 57% · 10 Ω (4), 0 Ω (2), 400 mΩ (2)
  • Series capacitor on 43% · 10 µF (4), 1 mF (4), 1 µF (2)
NC_10pin 17Connected to: Not connected 100%
NC_11pin 18Connected to: Not connected 100%
NC_12pin 19Connected to: Not connected 100%
GND_2pin 21Connected to: GND 71% · a signal 29%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Power Supply by annegautham, Lightning in a bottle by rolypolytoy, Power Supply by annegautham and Digital test board by Benjamin-girard-1.

The TPS7A3301RGWR in open source designs

The gallery holds 11 open source boards using the TPS7A3301RGWR from 7 GitHub repositories; a typical one measures about 190 × 110 mm and carries around 254 components.

91% use four copper layers or more, and 18% carry an open source license.

The most starred is Power Supply by annegautham.

Parts used alongside the TPS7A3301RGWR

Microcontrollers on boards using the TPS7A3301RGWR

What boards using the TPS7A3301RGWR are built for

TPS7A3301RGWR: common questions

Where can I find a TPS7A3301RGWR reference design?

Each of the 11 boards on this page is a real design using the TPS7A3301RGWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS7A3301RGWR NC_1 pin connected?

The NC_1 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TPS7A3301RGWR.

How is the TPS7A3301RGWR NC_2 pin connected?

The NC_2 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TPS7A3301RGWR.

How is the TPS7A3301RGWR NC_3 pin connected?

The NC_3 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TPS7A3301RGWR.

What parts are used alongside the TPS7A3301RGWR?

The 0PTF0078P, TL074 and TPS7A4700RGWR appear in the most repositories here.

Which microcontrollers do boards using the TPS7A3301RGWR use?

Most are built on ESP32 (5), FPGA (1) and STM32 (1).

How big is a typical board using the TPS7A3301RGWR?

The median is 190 × 110 mm, and 9% are two-layer designs.

What is the most popular open source board using the TPS7A3301RGWR?

By GitHub stars, Power Supply by annegautham, with 2 stars.

Can I simulate one of these boards using the TPS7A3301RGWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part