8 open source boards using the TPS7A4701
Real designs built with the TPS7A4701, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Quantum control
embeddedos-org
280 × 200 mm740 parts16LMIT8RP2040/RP2350
Opentrig
Dawson-HEP
162.2 × 100 mm408 parts4LEPL-2.06Scintillating Chamber: SIPM Trigger Board
ThatAquarel
128.5 × 42 mm113 parts2LNo license2Scintillating Chamber: SIPM Trigger Board
Dawson-HEP
128.5 × 42 mm113 parts2LEPL-2.02STM32
Sigint systems
embeddedos-org
280 × 200 mm631 parts16LMIT8STM32
Sonar systems
embeddedos-org
233 × 160 mm538 parts12LMIT8STM32
Hardware security modules
embeddedos-org
300 × 200 mm510 parts16LMIT8STM32
Electronic warfare
embeddedos-org
233 × 160 mm502 parts14LMIT8
The TPS7A4701 in open source designs
The gallery holds 8 open source boards using the TPS7A4701 from 4 GitHub repositories; a typical one measures about 233 × 160 mm and carries around 506 components.
75% use four copper layers or more, and 63% carry an open source license.
The most starred is Quantum control by embeddedos-org.
Parts used alongside the TPS7A4701
Microcontrollers on boards using the TPS7A4701
What boards using the TPS7A4701 are built for
TPS7A4701: common questions
Where can I find a TPS7A4701 reference design?
Each of the 8 boards on this page is a real design using the TPS7A4701. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS7A4701?
The LT3461A, OPA858XDSG and TLV3501AIDBV appear in the most repositories here.
Which microcontrollers do boards using the TPS7A4701 use?
Most are built on STM32 (5) and RP2040/RP2350 (1).
How big is a typical board using the TPS7A4701?
The median is 233 × 160 mm, and 25% are two-layer designs.
What is the most popular open source board using the TPS7A4701?
By GitHub stars, Quantum control by embeddedos-org, with 8 stars.
Can I simulate one of these boards using the TPS7A4701 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.