5 open source boards using the TLV3501AIDBV
Real designs built with the TLV3501AIDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Scintillating Chamber: SIPM Trigger Board
Dawson-HEP
128.5 × 42 mm113 parts2LEPL-2.02Scintillating Chamber: SIPM Trigger Board
ThatAquarel
128.5 × 42 mm113 parts2LNo license2STM32
ETH1LCR3
BehrensG
160 × 100 mm532 parts6LNo license0DIY-amplifier
adamkral20-svg
90.9 × 71.6 mm91 parts4LNo license0STM32
Alpha spectrometer proto
Maniak003
54.6 × 21.5 mm85 parts2LNo license0
How designs wire the TLV3501AIDBV
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV3501AIDBV connects to, and the resistors, capacitors and other passives placed on it.
- The + pin has a series resistor on 5 of 5 designs, most often 10 kΩ (then 100 kΩ).
- The V+ pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 2.2 µF).
- The V- pin is tied to GND on 5 of 5 designs.
- The SHDN pin is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| -pin 1 | Connected to: A connector 40% |
|
| V-pin 2 | Connected to: GND 100% | — |
| +pin 3 | Connected to: Signal 100% |
|
| V+pin 4 | Connected to: 5V 100% |
|
| Pin 5 | Connected to: A connector 40% |
|
| SHDNpin 6 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Scintillating Chamber: SIPM Trigger Board by Dawson-HEP, Scintillating Chamber: SIPM Trigger Board by ThatAquarel, DIY-amplifier by adamkral20-svg and ETH1LCR3 by BehrensG.
The TLV3501AIDBV in open source designs
The gallery holds 5 open source boards using the TLV3501AIDBV from 5 GitHub repositories; a typical one measures about 128.5 × 42 mm and carries around 113 components.
60% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Scintillating Chamber: SIPM Trigger Board by Dawson-HEP.
Parts used alongside the TLV3501AIDBV
Microcontrollers on boards using the TLV3501AIDBV
What boards using the TLV3501AIDBV are built for
TLV3501AIDBV: common questions
Where can I find a TLV3501AIDBV reference design?
Each of the 5 boards on this page is a real design using the TLV3501AIDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TLV3501AIDBV + pin?
The + pin has a series resistor on 5 of 5 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 5 open source designs using the TLV3501AIDBV.
What decoupling capacitors do designs use on the TLV3501AIDBV V+ pin?
The V+ pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the TLV3501AIDBV.
How is the TLV3501AIDBV V- pin connected?
The V- pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV3501AIDBV.
What parts are used alongside the TLV3501AIDBV?
The LT3461A, OPA858XDSG and TPS7A4701 appear in the most repositories here.
Which microcontrollers do boards using the TLV3501AIDBV use?
Most are built on STM32 (2).
How big is a typical board using the TLV3501AIDBV?
The median is 128.5 × 42 mm, and 60% are two-layer designs.
What is the most popular open source board using the TLV3501AIDBV?
By GitHub stars, Scintillating Chamber: SIPM Trigger Board by Dawson-HEP, with 2 stars.
Can I simulate one of these boards using the TLV3501AIDBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.