5 open source boards using the TS5A23157DGSR
Real designs built with the TS5A23157DGSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Touchord
dovker
179 × 115 mm52 parts2LGPL-3.012ESP32
Slate113-mk1
xeno3dev
96.7 × 67.8 mm609 parts8LCC-BY-NC-4.02TIGP class board 2026 - main board
TIGP-Experimental-Methods
180 × 100 mm318 parts4LNo license0ESP32
Felső panel
NBence0
120.1 × 70.2 mm274 parts6LNo license0Raspberry Pi
CM5IO második terv
NBence0
155 × 100 mm174 parts6LNo license0
The TS5A23157DGSR in open source designs
The gallery holds 5 open source boards using the TS5A23157DGSR from 4 GitHub repositories; a typical one measures about 155 × 100 mm and carries around 274 components.
80% use four copper layers or more, and 20% carry an open source license.
The most starred is Touchord by dovker.
Microcontrollers on boards using the TS5A23157DGSR
What boards using the TS5A23157DGSR are built for
TS5A23157DGSR: common questions
Where can I find a TS5A23157DGSR reference design?
Each of the 5 boards on this page is a real design using the TS5A23157DGSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TS5A23157DGSR use?
Most are built on ESP32 (2), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the TS5A23157DGSR?
The median is 155 × 100 mm, and 20% are two-layer designs.
What is the most popular open source board using the TS5A23157DGSR?
By GitHub stars, Touchord by dovker, with 12 stars.
Can I simulate one of these boards using the TS5A23157DGSR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.