2 open source boards using the TT_IHP_ASIC
Real designs built with the TT_IHP_ASIC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
QFN Breakout For TinyTapeout IHP ASICs
TinyTapeout
50 × 50 mm37 parts4LApache-2.021
QFN Breakout For TinyTapeout IHP ASICs
chipfoundry
50 × 50 mm37 parts4LApache-2.00
The TT_IHP_ASIC in open source designs
The gallery holds 2 open source boards using the TT_IHP_ASIC from 2 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 37 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is QFN Breakout For TinyTapeout IHP ASICs by TinyTapeout.
Parts used alongside the TT_IHP_ASIC
What boards using the TT_IHP_ASIC are built for
TT_IHP_ASIC: common questions
Where can I find a TT_IHP_ASIC reference design?
Each of the 2 boards on this page is a real design using the TT_IHP_ASIC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TT_IHP_ASIC?
The 24LC02BT-I/MC, AP2112K-1.2TRG1 and AP2112K-1.8TRG1 appear in the most repositories here.
How big is a typical board using the TT_IHP_ASIC?
The median is 50 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the TT_IHP_ASIC?
By GitHub stars, QFN Breakout For TinyTapeout IHP ASICs by TinyTapeout, with 21 stars.
Can I simulate one of these boards using the TT_IHP_ASIC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.