3 open source boards using the TVS_ESD_USB
Real designs built with the TVS_ESD_USB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SparkFun NEO-F10N panelized
sparkfun
174.7 × 90.4 mm57 parts2LMIT1ESP32
SparkFun Thing Plus ESP32-S3 panelized
sparkfun
106.6 × 205.2 mm59 parts4LMIT12ESP32
SparkFun Thing Plus ESP32-S3 panelized
Valar-Systems
106.6 × 205.2 mm59 parts4LCERN-OHL-S-2.0112
The TVS_ESD_USB in open source designs
The gallery holds 3 open source boards using the TVS_ESD_USB from 3 GitHub repositories; a typical one measures about 106.6 × 205.2 mm and carries around 59 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is SparkFun Thing Plus ESP32-S3 panelized by Valar-Systems.
Parts used alongside the TVS_ESD_USB
Microcontrollers on boards using the TVS_ESD_USB
What boards using the TVS_ESD_USB are built for
TVS_ESD_USB: common questions
Where can I find a TVS_ESD_USB reference design?
Each of the 3 boards on this page is a real design using the TVS_ESD_USB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TVS_ESD_USB use?
Most are built on ESP32 (2).
How big is a typical board using the TVS_ESD_USB?
The median is 106.6 × 205.2 mm, and 33% are two-layer designs.
What is the most popular open source board using the TVS_ESD_USB?
By GitHub stars, SparkFun Thing Plus ESP32-S3 panelized by Valar-Systems, with 112 stars.
Can I simulate one of these boards using the TVS_ESD_USB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.