4 open source boards using the TXU0102QDCURQ1
Real designs built with the TXU0102QDCURQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Dut hub hw
Netlist-Studio
100 × 155 mm147 parts4LCERN-OHL-S-2.011
Main ext
roman-khvatov
155 × 93 mm165 parts4LMIT1
Generic
108.2 × 114.7 mm154 parts2LMIT1
Main int
135 × 85 mm151 parts4LMIT1
The TXU0102QDCURQ1 in open source designs
The gallery holds 4 open source boards using the TXU0102QDCURQ1 from 2 GitHub repositories; a typical one measures about 121.6 × 103.9 mm and carries around 153 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is Dut hub hw by Netlist-Studio.
Microcontrollers on boards using the TXU0102QDCURQ1
What boards using the TXU0102QDCURQ1 are built for
TXU0102QDCURQ1: common questions
Where can I find a TXU0102QDCURQ1 reference design?
Each of the 4 boards on this page is a real design using the TXU0102QDCURQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TXU0102QDCURQ1 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the TXU0102QDCURQ1?
The median is 121.6 × 103.9 mm, and 25% are two-layer designs.
What is the most popular open source board using the TXU0102QDCURQ1?
By GitHub stars, Dut hub hw by Netlist-Studio, with 11 stars.
Can I simulate one of these boards using the TXU0102QDCURQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.