4 open source boards using the USB2422
Real designs built with the USB2422, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Printalyzer - Main Board
dektronics
188 × 110 mm136 parts4LNo license37AVR/Arduino
Rvi v2x hardware
PDXostc
85 × 56 mm186 parts2LMPL-2.09Kicad pmxdalfin
faoziaziz
142.9 × 91.9 mm327 parts4LGPL-3.00Kicad pmxdalfin board2
faoziaziz
186 × 112.5 mm226 parts4LGPL-3.00
The USB2422 in open source designs
The gallery holds 4 open source boards using the USB2422 from 3 GitHub repositories; a typical one measures about 164.4 × 100.9 mm and carries around 206 components.
75% use four copper layers or more, and 75% carry an open source license.
The most starred is Printalyzer - Main Board by dektronics.
Microcontrollers on boards using the USB2422
USB2422: common questions
Where can I find a USB2422 reference design?
Each of the 4 boards on this page is a real design using the USB2422. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the USB2422 use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the USB2422?
The median is 164.4 × 100.9 mm, and 25% are two-layer designs.
What is the most popular open source board using the USB2422?
By GitHub stars, Printalyzer - Main Board by dektronics, with 37 stars.
Can I simulate one of these boards using the USB2422 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.