3 open source boards using the USB2422-I/MJ
Real designs built with the USB2422-I/MJ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Dc scm breakout board
antmicro
108 × 70 mm274 parts6LApache-2.09FPGA
Open-TWIST rev0
louisreg
186 × 160 mm805 parts6LNo license0RP2040/RP2350
OWL - Rotor v2
sedlak477
60 × 60 mm104 parts4LCERN-OHL-P-2.00
The USB2422-I/MJ in open source designs
The gallery holds 3 open source boards using the USB2422-I/MJ from 3 GitHub repositories; a typical one measures about 108 × 70 mm and carries around 274 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Dc scm breakout board by antmicro.
Microcontrollers on boards using the USB2422-I/MJ
What boards using the USB2422-I/MJ are built for
USB2422-I/MJ: common questions
Where can I find a USB2422-I/MJ reference design?
Each of the 3 boards on this page is a real design using the USB2422-I/MJ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the USB2422-I/MJ use?
Most are built on FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the USB2422-I/MJ?
The median is 108 × 70 mm, and 0% are two-layer designs.
What is the most popular open source board using the USB2422-I/MJ?
By GitHub stars, Dc scm breakout board by antmicro, with 9 stars.
Can I simulate one of these boards using the USB2422-I/MJ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.