2 open source boards using the VO2611

Real designs built with the VO2611, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The VO2611 in open source designs

The gallery holds 2 open source boards using the VO2611 from 2 GitHub repositories; a typical one measures about 201 × 121.8 mm and carries around 90 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Shack Relay Matrix rev C: controller board by PE1RGU.

Microcontrollers on boards using the VO2611

What boards using the VO2611 are built for

VO2611: common questions

Where can I find a VO2611 reference design?

Each of the 2 boards on this page is a real design using the VO2611. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the VO2611 use?

Most are built on AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the VO2611?

The median is 201 × 121.8 mm, and 50% are two-layer designs.

What is the most popular open source board using the VO2611?

By GitHub stars, Shack Relay Matrix rev C: controller board by PE1RGU, with 2 stars.

Can I simulate one of these boards using the VO2611 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part