1 open source board using the WCH CH32V307VCT6
Real designs built with the WCH CH32V307VCT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
QuchaoshengThe WCH CH32V307VCT6 in open source designs
The gallery holds 1 open source boards using the WCH CH32V307VCT6 from 1 GitHub repository; a typical one measures about 160 × 130 mm and carries around 106 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Workbench-1 Controller by Quchaosheng.
Microcontrollers on boards using the WCH CH32V307VCT6
What boards using the WCH CH32V307VCT6 are built for
WCH CH32V307VCT6: common questions
Where can I find a WCH CH32V307VCT6 reference design?
Each of the 1 boards on this page is a real design using the WCH CH32V307VCT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the WCH CH32V307VCT6 use?
Most are built on RISC-V (1).
How big is a typical board using the WCH CH32V307VCT6?
The median is 160 × 130 mm, and 0% are two-layer designs.
What is the most popular open source board using the WCH CH32V307VCT6?
By GitHub stars, Workbench-1 Controller by Quchaosheng, with 129 stars.
Can I simulate one of these boards using the WCH CH32V307VCT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.