2 open source boards using the X Axis
Real designs built with the X Axis, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Onyx-Stepper-Motherboard
CuriousMotor
105.2 × 71.1 mm90 parts2LMIT56- schematic only · 54 parts
Cx22
owen-rp2a03
54 partsNo license1
The X Axis in open source designs
The gallery holds 2 open source boards using the X Axis from 2 GitHub repositories; a typical one measures about 105.2 × 71.1 mm and carries around 72 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Onyx-Stepper-Motherboard by CuriousMotor.
Parts used alongside the X Axis
Microcontrollers on boards using the X Axis
What boards using the X Axis are built for
X Axis: common questions
Where can I find a X Axis reference design?
Each of the 2 boards on this page is a real design using the X Axis. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the X Axis use?
Most are built on ESP32 (1).
How big is a typical board using the X Axis?
The median is 105.2 × 71.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the X Axis?
By GitHub stars, Onyx-Stepper-Motherboard by CuriousMotor, with 56 stars.
Can I simulate one of these boards using the X Axis before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.